par Miná, Émerson Mendonça;da Silva, Yuri Cruz;Dille, Jean 
;Silva, Cleiton Carvalho
Référence Metallurgical and materials transactions. A, Physical metallurgy and materials science, 47, 12, page (6138-6147)
Publication Publié, 2016-12
;Silva, Cleiton CarvalhoRéférence Metallurgical and materials transactions. A, Physical metallurgy and materials science, 47, 12, page (6138-6147)
Publication Publié, 2016-12
Article révisé par les pairs
| Résumé : | Dilution and microsegregation are phenomena inherent to claddings, which, in turn, directly affect their main properties. This study evaluated microsegregation in the fusion zone with different dilution levels. The overlays were welded by the TIG cold wire feed process. Dilution was calculated from the geometric characteristics of the claddings and from the conservation of mass equation using chemical composition measurements. Microsegregation was calculated using energy dispersive X-ray spectroscopy measurements of the dendrites and the chemical composition of the fusion zone. The dilution of the claddings was increased by reducing the wire feed rate. Fe showed potential to be incorporated into the solid phase (k > 1), and this increased with the increase of dilution. Mo, in turn, was segregated into the liquid phase (k < 1) and also increased with the increase of dilution. However, Cr and W showed a slight decrease in their partition coefficients (k) with the increase of dilution. |
