par Mencarelli, Marta ;Puggelli, Luca;Innocenti, Bernardo ;Volpe, Yary
Référence Applied Mechanics, 6, 3, 70
Publication Publié, 2025-09-01
Article révisé par les pairs
Résumé : This study examines the influence of printing parameters and filament composition on the mechanical properties of 3D printed parts, building upon prior research in fused deposition modeling. Two combinations of printing parameters, 75% infill, 0° orientation, four outer shells, with either gyroid and 3D Honeycomb infill patterns—were analyzed across eleven materials, including acrylonitrile butadiene styrene, polylactic acid, polylactic acid-based composites, polyethylene terephthalate glycol, and high-impact polystyrene. Tensile, compression, and bending tests were performed on the printed specimens to determine stiffness and elastic modulus. Each material demonstrated different levels of variability and sensitivity to printing parameters under the various loading conditions, emphasizing that no single configuration is optimal across all scenarios. For example, the gyroid pattern led to increases up to ~35% in bending modules for common thermoplastic filaments and ~30% for stone-filled polymers, while in tensile stiffness, variations between infill patterns remained below 5% for other conventional polymers. These findings underline the load-specific nature of optimal parameter combinations and the influence of material-specific characteristics, such as filler content or microstructural homogeneity. This study provides quantitative insights that can support application-driven parameter selection in additive manufacturing, offering a comparative dataset across widely used and emerging filaments.

Documents en relation