par Philippi, Julien 
;Bechert, Mathias;Chouffart, Quentin;Waucquez, Christophe;Scheid, Benoît
Référence Physical Review Fluids, 7, 4, 043901
Publication Publié, 2022-06-01
;Bechert, Mathias;Chouffart, Quentin;Waucquez, Christophe;Scheid, Benoît Référence Physical Review Fluids, 7, 4, 043901
Publication Publié, 2022-06-01
Article révisé par les pairs
| Résumé : | The draw resonance effect appears in fiber drawing processes when the draw ratio, defined as the ratio between the take-up and the inlet velocities, exceeds a critical value. In many cases, inertia, gravity, and surface tension cannot be neglected, and a model combining all these effects is necessary in order to correctly describe the physics of the phenomenon. Additionally, it is also known that cooling can have a highly stabilizing effect on the draw resonance instability. However, a detailed analysis encompassing the effect of inertia, gravity, surface tension, and temperature is still lacking. Due to a destabilizing effect induced by geometry in the heat equation, we first show that the maximum critical draw ratio for fiber drawing can be two orders of magnitude lower than the one for the film casting problem when the heat transfer coefficient is assumed constant. By introducing a scaling making the fiber aspect ratio an independent parameter, we next show that the high value of the critical draw ratio encountered in industrial applications could be rationalized only if we consider that the heat transfer coefficient is not constant but depends on both the velocity and the cross-section area of the fiber. Within this framework, we show how the practical stability window is affected by the five control parameters: the draw ratio, the fiber aspect ratio, the inlet temperature, the convective heat transfer coefficient, and the stiffness of the non-homogeneous ambient temperature. We finally discuss the influence of radiative heat transfer on the stability. |
